Midnight Blue French Pattern Tiles & Pavers




European Bluestone Midnight Granite Harkaway Bluestone Raven Grey Granite



Midnight Blue French Pattern Tiles are a series of striking rich dark blue stone tiles and pavers offering you a cheaper darker alternative to genuine bluestone tiles and pavers. As sophisticated as a little black dress, Midnight Blue looks sensational in a myriad of applications. Unlike Chinese Bluestone it has a rather unique leathered look surface, giving you a lightly textured non slip surface. This stone can be occasionally slightly lippy tumbled edges, with length & width tolerances of +/-2mm and thickness variances of +/-4mm. It can easily be laid in sand and cement were its very easy to adjust the bed height with an 8mm grout joint. It competes directly with Chinese Bluestone 400 grit, it simply gives you a more natural feel without any catspaw holes in the surface. You will get occasional natural layering on the tiles surface which adds grip and adds to that natural look and feel of the tile.

We recommend the following:

10mm Thick: Tiles should be laid onto a concrete slab, great for balconies, decks.

15mm-20mm Thick: Pavers can be laid as above or onto a compacted road base into a wet slurry of sand and cement.

30mm Thick: Pavers can be laid as both above or onto a compacted road base into a dry sand bed, great for tiling over easements or where you require water permeation to occur for drainage.

Midnight Blue is an exceptionally hard and dense Blue Limestone from the Asian region, offering you a GREAT alternative to basalt tiles and pavers.

We deliver Midnight blue door-to-door to all suburbs in MelbourneSydneyAdelaideBrisbane, Canberra and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.

Midnight blue tiles & pavers is a perfect choice for…

driveway paving icon by stone pavers australia pool coping paving stone pavers melbourne fire place wall cladding by stone pavers australia stepping stone pavers icon by stone pavers

For more information feel free to give us a call on 03 9706 9767 or Talk to one of our experts and get a FREE Quote

Additional information


French Pattern 22mm ± 3mm $85 m²


Installation Guidelines

We recommend that you grade the pavers into 2-3 thickness groups prior to installation. This is easily done as you are taking the tiles out of the crates and will also mix any variations in colour through the job from different crates.

15mm is recommended to be ONLY layed in a rapid setting adhesive and please use a 6mm trowel as follows…. Notch out 6mm of adhesive on the slab and 6mm cross notched on the back of each tile. Also please lay in BRICK or STRETCHER BOND patterns and allow for a 8mm minimum grout joint to allow for any tile variations in length or width. DO NOT ACID WASH your pavers. 


Bluestone tiles and pavers can be sealed as a peace of mind to ensure bluestone stays in pristine condition. It’s highly recommended particularly in areas where there may be high spillage to protect the lustre of the bluestone tiles and pavers.

If you choose not to seal your tiles, make sure you clean up spills immediately to avoid staining the tiles. Use only a penetrating invisible type sealer (no colour change) similar to Tasman Chemicals STONE SHIELD and ALWAYS follow the sealer manufacturers instructions when applying. We stock a FULL range of suitable sealers.


Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react adversely.To clean prior to sealing simply pressure wash the stone and ensure nozzle is never closer than 300mm to the surface of the stone.


Just sweep when needed. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. A solution of mild detergent and water can be applied prior to pressure cleaning.